DPI 620 Genii IS
Multifunctionele calibrator, Atex
Prijs op aanvraag
De Druck DPI 620 Genii IS is een makkelijk te gebruiken, robuust en zeer nauwkeurig multifunctioneel test- en kalibratie-systeem met optioneel volledige HART en Foundation Fieldbus communicatie, specifiek voor gevaarlijke zones. Het is de intrinsiek veilige versie van de zeer succesvolle DPI 620 GENII en de opvolger van de DPI620 IS kalibrator.
Anderen kochten ook:
- Productbeschrijving
- Extra informatie
- Video
- Downloads
-
De Druck DPI 620 Genii IS is een makkelijk te gebruiken, robuust en zéér nauwkeurig multifunctioneel test- en kalibratie-systeem met optioneel volledige HART en Foundation Fieldbus communicatie, specifiek voor gevaarlijke zones. Het is de intrinsiek veilige versie van de zeer succesvolle DPI 620 GENII en de opvolger van de DPI620 IS kalibrator. Het instrument biedt alle voordelen van de DPI620 GENII met ATEX en IECEx goedkeuring voor de zones 1 en 2.
Het is GE's “next-generation” instrument voor de kalibratie, configuratie en onderhoud van elektrische, frequentie, druk en temperatuur instrumenten in meet- en controle toepassingen. DPI 620 Genii IS kan een groot aantal parameters tegelijkertijd meten en simuleren waaronder mA, mV, V, Ohm, frequentie, RTD's, thermokoppels, en HART / Fieldbus digitale signalen. Het beschikt over een stroomvoorziening waarmee u uw instrumenten onder test van loop spanning kunt voorzien.De sterk verbeterde accu maakt “hot swopping” in gevaarlijke gebieden mogelijk, u kunt nu heel eenvoudig uw batterij in de gevaarlijke zone verwisselen. De accu is voorzien van een LED laad indicator die de batterij conditie laat zien zonder dat het noodzakelijk is het apparaat in te schakelen. Dankzij zijn veelzijdigheid en kracht, is dit een uniek tool die je nodig hebt voor het kalibreren en onderhouden van vele procesparameters.
Belangrijkste kenmerken
- Multi-functioneel: electrische, frequentie, temperatuur en druk parameters
- 5 Kanalen voor gelijktijdig meten en simuleren van mA, V, Ohms, frequentie, druk, RTD's en T/Cs, HART, Fieldbus
- ATEX en IECEx approval voor gevaarlijke zones 1 en 2
- Simpele en gebruiksvriendelijke touch screen interface.
- Snelle menu applicaties zoals DASHBOARD, TASK selectie & FAVORIETEN
- 1 jaar onzekerheid voor mA 0.016%RDG + 0.0065%FS
- 1 jaar onzekerheid voor druk van 0.025%FS
- 31 plug en play druk modules van 25 mbar tot 1000 bar (PM620 optie)
- Snel druk genereren van vacuüm tot 100 bar pneumatisch of 1000 bar hydraulisch (PV621/PV622/PV623 opties)
- Volledige HART, Foundation Fieldbus & Profibus communicatie optie
- Volledig documenteren – automatische procedures, PASS/FAIL melding, opslag van meetresultaten
- Interface voor GE kalibratie software of andere bekende kalibratie software zoals AMS
- Data logging tot to 32Gb opslag. Ruim voldoende voor een complete database of procedures & resultaten
- Hand held unit, compact en lichtgewicht - slechts 1.1 Kg/2.4lb.
- Intrinsiek veilige Lithium-Polymer batterij levert voldoende power voor een volledige 8 uur kalibratie ronde
-
Intrinsically safe DPI620G-IS general specifications for hazardous area use
Processor and memory
800 MHz Processor
512 MB 800 MHz SDRAM
8 GB Internal flash memory
Display
Size: 110 mm (4.3 in) diagonal; 480 x 800 pixels
LCD: Colour display with touch-screen
Protected by 2 mm toughened glass, impact tested in accordance with BS EN 61010-1:2010 (0.5kg object from 1 m)
File Viewers
A Windows® desktop is available for managing files, running third party applications and viewing simple images, Word documents, Excel spreadsheets, PDF files and PowerPoint files
Languages
English {Default}, Chinese, French, German, Italian, Portuguese, Russian, Spanish, Dutch, Japanese
Operating temperature
-10° to 50°C (14° to 122°F)
Storage temperature
-20° to 70°C (-4° to 158°F)
Ingress Protection
IP55
Humidity
0 to 90% RH Non condensing
Shock / Vibration
BS EN 61010-1:2010; MIL-PRF-28800F for Class II equipment, 1 m Drop Tested
EMC
Electromagnetic compatibility: BS EN 61326-1:2006
Electrical safety
Electrical – BS EN 61010-1: 2010
Pressure safety
Pressure Equipment Directive - Class: Sound Engineering Practice (SEP)
Approval
CE Marked
Baseefa 16ATEX0002X
Ex II 1 G
Ex ib IIC T4 Gb (-10°C ≤ Ta ≤ +50°C)
IECEx BAS 16.0010X
Size (L: W: H)
183 x 114 x 55 mm (7.2 x 4.5 x 2.2 in)
Weight
1.1 kg (2.4 lb) – battery included.
Power supply
Lithium-ion battery (GE Part number: DPI620G-IS-BATTERY); Capacity: 4800 mAh. Nominal voltage: 3.75 V. Charge temperature: 0° to 40°C (32° to 104°F) Discharge temperature: -10° to 50°C (14° to 12°F). Charge/discharge cycles: > 500 > 70% capacity. Safe area charging only using external charger DPI620G-IS-CHARGER and universal mains adaptor IO620-PSU. The battery is detached from the instrument using two thumb screws and mounted on the charger. The battery can be taken into a hazardous area without being connected to an instrument and can attached and detached in the be hazardous area. The battery has an LED indicator to show the charge state of the battery without having to turn the instrument on or when it is not attached to an instrument
Duration
Measure functions (CH1): ≈ 7 hours continuous. Dual Function, mA measure (CH2): ≈ 5 hours (24 V Source at 12 mA)
Connectivity
USB Type Mini B (client)
Electrical Measurement and Source NLH&R1
±1°C (2°F) for 24 hrs
(note 2)Total Uncertainty
10° to 30°C (50° to 86°F)
for 1 year (note 3)Additional error
-10° to 10°C (14° to 50°F)
30° to 50°C (86° to 122°F)Resolution Display
reading
window%Rdg
+%FS
%Rdg +%FS %Rdg/
°C+%FS/
°CMeasure mode
DC Voltage
Thermocouple
Please refer to Thermocouple specification table
CH1 TC mode -10 to 100 mV
0.0045
0.008
0.007 (0.009)
0.01
0
0.0005
0.001
CH1
+/- 200 mV
0.0045
0.004
0.01
0.005
0
0.0005
0.001
CH1
CH2
+/- 2000 mV
0.004
0.003
0.0095 (0.01)
0.005
0
0.0005
0.01
CH1
CH2
+/- 20 V
0.0025
0.002
0.0145
0.002
0
0.0005
0.00001
CH1
CH2
+/- 30 V
0.0035
0.0035
0.0145
0.004
0
0.0005
0.0001
CH1
CH2
AC Voltage
(note 1)
Not applicable to DPI620G-IS
versions0 to 2000 mVAC
0.125
0.125
0.2
0.15
0.005
0.005
0.1
CH1
0 to 20 VAC
0.1255
0.125
0.2
0.15
0.005
0.005
0.001
CH1
0 to 300 VAC
1
0.06
1.5
0.1
0.05
0.005
0.01
CH1
Current
+/- 20 mA
0.006
0.005
0.012 (0.016)
0.006 (0.0065)
0
0.0005
0.0001
CH1
CH2
+/- 55 mA
0.005
0.005
0.016 (0.019)
0.005 (0.006)
0
0.0005
0.0001
CH1
CH2
Resistance (True, 4 wire)
RTD
Please refer to RTD specification table
CH1 0 to 400 Ω
0.0055 (0.006)
0.001 (0.002)
0.009
0.0012
0
0.0005
0.001
CH1
0 to 4000 Ω
0.0055 (0.006)
0.001 (0.002)
0.009
0.0012
0
0.0005
0.01
CH1
Resistance (4 wire)
RTD
Please refer to RTD specification table
CH1 0 to 400 Ω
0.012
0.005
0.015
0.006
0
0.001
0.001
CH1
0 to 4000 Ω
0.0115
0.0045
0.015
0.006
0
0.001
0.01
CH1
Frequency
0 to 1000 Hz
0.0003
0.0002
0.003
0.0002
0.0001
CH1
1 kHz to 50 kHz (5 kHz)
0.0003
0.0004
0.003
0.0004
0.00001
CH1
0 to 999999 CPM
Refer to range table above for equivalent frequency
0.01
CH1 0 to 999999 CPH
Refer to range table above for equivalent frequency
0.01
CH1 Trigger level
Automatic and adjustable 0 to 20 V
0.1
Trigger level
Automatic or manual setting 0 to 20 V
0.1
Pressure
25 mbar to 1000 bar
Please refer to PM 620 pressure range table
P1 P2 IDOS external module
Please refer to IDOS UPM datasheet. Cable P/N IO620-IDOS-USB required
IDOS USB port
Please refer to GE Sensing for compatible devices
USB Source mode DC Voltage
TC mode
Please refer to Thermocouple specification table
TC mode -10 to 100 mV
0.009
0.008
0.014
0.01
0
0.0005
0.001
CH1
0 to 200 mV
0.0045
0.004
0.01
0.005
0
0.0005
0.1
CH1
0 to 2000 mV
0.004
0.003
0.009
0.005
0
0.0005
0.1
CH1
0 to 20 V (12 V) @ 3 mA
max.
0.006
0.002 (0.0035)
0.0145 (0.015)
0.002 (0.004)
0
0.0005
0.001
CH1
Current
0 to 24 mA with ext. loop power
0.01
0.004
0.015
0.005
0
0.0005
0.001
CH1
CH2
0 to 24 mA with int. loop power
0.01
0.004
0.015
0.005
0
0.0005
0.001
CH2
Internal loop power
15V +/-10%; 100R output impedance
Resistance2
RTD
Please refer to RTD specification table
CH1 0 to 400 Ω (0.1 mA)
0.024(0.026)
0.0035 (0.0045)
0.03 (0.035)
0.0075 (0.012)
0
0.001
0.01
CH1
0 to 400 Ω (0.5 mA)
0.004
0.0025
0.008
0.003
0
0.001
0.01
CH1
400 to 2000 Ω (0.05 mA)
0.048
0.0035
0.06
0.006
0
0.001
0.01
CH1
2 k to 4 kΩ (0.05 mA)
0.048
0.0035
0.06
0.0045
0
0.001
0.01
CH1
Maximum input current
0-400 Ω 5 mA, 400-2000 Ω 1mA, 2000-4000 Ω 0.5 mA
Frequency
0 to 1000 Hz
0.0003
0.00023
0.003
0.00023
0.1
CH1
1 kHz to 50 kHz (5 kHz)
0.0003
0.000074
0.003
0.000074
0.001
CH1
Output waveform
Square, positive swing up to 20 V (12V) adjustable, negative swing -120 mV (fixed)
Sine and Triangular, adjustable amplitude and offset within the limits -2.5 (-0.5) to +20 V (+12 V)Square wave peak output
0 to 20 V +/-20 mV (3 mA maximum)
0 to 99999 CPM
Please refer to range table above for equivalent frequency
1 CH1 0 to 99999 CPH
Please refer to range table above for equivalent frequency
1 CH1 Notes:
Values in () apply to DPI620G-IS models
1. Specification applies, 45 to 65 Hz and between 10% and 100% of full scale
2. Specification applies when calibration temperature is between 10 and 30°C
3. Total uncertainty includes reference standard uncertainty, NLH&R and typical long term stability for one year (K=2)Multiple parameter display capability
The display can be configured to show a maximum of 6 (5 for IS versions) simultaneous reading windows as follows: CH1, CH2, P1, P2, IDOS (not IS versions), HART/Fieldbus)
“True Ohms” RTD Measure Mode (4-wire)
Type
Temperature coefficient
Temperature range
Total Uncertainty
10° to 30°C (50° to 86°F)
for 1 year°C
°F
Rdg
Tos
From
To
From
To
%
°C
°F
Pt 50
3.85
-200
850
-328
1562
0.012
0.05
0.09
Pt 100
3.85
-200
850
-328
1562
0.012
0.04
0.07
Pt 100
3.92
-200
850
-328
1562
0.012
0.04
0.07
Pt 200
3.85
-200
260
-328
500
0.01
0.03
0.051
260
850
500
1562
0.15
0.077
0.14
Pt 500
3.85
-200
-60
-328
-76
0.01
0.026
0.044
-60
0
-76
32
0.015
0.05
0.086
0
850
32
1562
0.012
0.05
0.086
Pt 1000
3.85
-200
-150
-328
-238
0.009
0.024
0.04
-150
0
-238
32
0.011
0.036
0.061
0
850
32
1562
0.012
0.036
0.061
Cu 10
4.27
-200
0
-328
32
0
0.14
0.25
0
260
32
500
0
0.17
0.3
D 100
6.18
-200
0
-328
32
0.01
0.035
0.06
0
640
32
1184
0.012
0.035
0.06
Ni 100
6.72
-60
0
-76
32
0
0.026
0.047
0
250
32
482
0
0.03
0.055
Ni 120
6.72
-80
0
-112
32
0
0.022
0.04
0
270
32
518
0
0.028
0.05
270
320
518
608
0
0.057
0.1
Standard RTD Measure Mode (4-wire)
Type
Temperature coefficient
Temperature range
Total Uncertainty
10° to 30°C (50° to 86°F)
for 1 year
°C
°F
Rdg
Tos
From
To
From
To
%
°C
°F
Pt 50
3.85
-200
850
-328
1562
0.021
0.16
0.28
Pt 100
3.85
-200
0
-328
32
0.017
0.1
0.175
0
850
32
1562
0.0215
0.1
0.174
Pt 100
3.92
-200
0
-328
32
0.017
0.1
0.175
0
850
32
1562
0.0215
0.1
0.174
Pt 200
3.85
-200
0
-328
32
0.017
0.069
0.12
0
260
32
500
0.018
0.069
0.12
260
850
500
1562
0.033
0.33
0.6
Pt 500
3.85
-200
-60
-328
-76
0.0165
0.051
0.09
-60
0
-76
32
0.017
0.16
0.29
0
850
32
1562
0.024
0.16
0.28
Pt 1000
3.85
-200
-150
-328
-238
0.016
0.044
0.074
-150
0
-238
32
0.018
0.1
0.175
0
850
32
1562
0.0215
0.1
0.174
Cu 10
4.27
-200
0
-328
32
0.035
0.66
1.18
0
260
32
500
0.01
0.66
1.18
D 100
6.18
-200
0
-328
32
0.019
0.1
0.174
0
640
32
1184
0.02
0.1
0.174
Ni 100
6.72
-60
0
-76
32
0
0.071
0.13
0
250
32
482
0.002
0.071
0.13
Ni 120
6.72
-80
270
-112
518
0
0.06
0.11
270
320
518
608
0
0.2
0.36
RTD Simulate Mode (0.1 mA min, 0-400 Ω; 0.05 mA min, 400-4000 Ω)
Type
Temperature coefficient
Temperature range
Total Uncertainty
°C
°F
Rdg
Tos
From
To
From
To
%
°C
°F
Pt 50
3.85
-200
850
-328
1562
0.043 (0.052)
0.24 (0.35)
0.42 (0.63)
Pt 100
3.85
-200
850
-328
1562
0.04 (0.047)
0.16 (0.22)
0.28 (0.40)
Pt 100
3.92
-200
850
-328
1562
0.04 (0.047)
0.16 (0.22)
0.28 (0.40)
Pt 200
3.85
-200
260
-328
500
0.0345 (0.041)
0.12 (0.16)
0.21 (0.29)
260
850
500
1562
0.087
0.28
0.50
Pt 500
3.85
-200
-60
-328
-76
0.33 (0.038)
0.095 (0.12)
0.169 (0.22)
-60
850
-76
1562
0.078
0.23
0.41
Pt 1000
3.85
-200
-150
-328
-238
0.32 (0.037)
0.085 (0.11)
0.15 (0.20)
-150
260
-238
500
0.0675
0.19
0.34
260
850
500
1562
0.082
0.17
0.31
Cu 10
4.27
-200
260
-328
500
0
0.85 (1.40)
1.53 (2.52)
D 100
6.18
-200
640
-328
1184
0.38 (0.046)
0.16 (0.22)
0.28 (0.40)
Ni 100
6.72
-60
250
-76
482
0
0.12 (0.16)
0.22 (0.29)
Ni 120
6.72
-80
270
-112
518
0
0.11 (0.14)
0.20 (0.25)
270
320
518
608
0
0.25
0.45
Notes:
These figures relate to DPI 620 Genii uncertainties only Values in () apply to DPI620G-IS models
For RTD Measure and Source functions the uncertainty is given by:-
Urtd = T(°C) x %Rdg + Tos (°C)or
Urtd = T(°F) x%Rdg + Tos (°F)
where T( ) is the measurement expressed in °C or °FMeasurement resolution:
0.01 °C/F
Simulation resolution 0.1 °C/FExcitation current:
Measure mode 0 to 400Ω 2.5mA, 400Ω to 4000Ω 0.5 mA;
Simulate mode 0 to 400Ω 5mAmax, 0.4 to 2kΩ 1mA max and 2 to 4 kΩ 0.5mA max
Simulate mode pulsed excitation current minimum duration 10 ms
Thermocouple Measurement and Simulation Measurement Simulation Type Standard Temperature range Total Uncertainty 10° to 30°C (50° to 86°F) for 1 year
°C °F °C °F °C °F From
To
From
To
B
IEC 584
250.00
500.00
482.00
932.00
4.00
7.20
4.00
7.20
500.00
700.00
932.00
1,292.00
2.00
3.60
2.00
3.60
700.00
1,200.00
1,292.00
2,192.00
1.50
2.70
1.50
2.70
1,200.00
1,820.00
2,192.00
3,308.00
1.00 (1.10)
1.80 (1.98)
1.10
1.98
E
IEC 584
-270.00
-200.00
-454.00
-328.00
2.00
3.60
2.00
3.60
-200.00
-120.00
-328.00
-184.00
0.50
0.90
0.50
0.90
-120.00
1,000.00
-184.00
1,832.00
0.25
0.45
0.30
0.54
J
IEC 584
-210.00
-140.00
-346.00
-220.00
0.50
0.90
0.50
0.90
-140.00
1,200.00
-220.00
2,192.00
0.30
0.54
0.40
0.72
K
IEC 584
-270.00
-220.00
-454.00
-364.00
4.00
7.20
4.00
7.20
-220.00
-160.00
-364.00
-256.00
1.00
1.80
1.00
1.80
-160.00
-60.00
-256.00
-76.00
0.50
0.90
0.50
0.90
-60.00
800.00
-76.00
1,472.00
0.30 (0.40)
0.54 (0.72)
0.40
0.72
800.00
1,370.00
1,472.00
2,498.00
0.50
0.90
0.60
1.08
L
DIN 43710
-200.00
-100.00
-328.00
-148.00
0.40
0.72
0.40
0.72
-100.00
900.00
-148.00
1,652.00
0.25
0.45
0.30
0.54
N
IEC 584
-270.00
-200.00
-454.00
-328.00
7.00
12.60
7.00
12.60
-200.00
-40.00
-328.00
-40.00
1.00
1.80
1.00
1.80
-40.00
1,300.00
-40.00
2,372.00
0.40
0.72
0.50
0.90
R
IEC 584
-50.00
360.00
-58.00
680.00
3.00
5.40
3.00
5.40
360.00
1,760.00
680.00
3,200.00
1.00
1.80
1.10
1.98
S
IEC 584
-50.00
70.00
-58.00
158.00
3.00
5.40
3.00
5.40
70.00
320.00
158.00
608.00
1.50
2.70
1.50
2.70
320.00
660.00
608.00
1,220.00
1.10
1.98
1.20
2.16
660.00
1,740.00
1,220.00
3,164.00
1.00 (1.10)
1.80 (1.98)
1.20
2.16
T
IEC 584
-270.00
-230.00
-454.00
-382.00
3.00
5.40
3.00
5.40
-230.00
-50.00
-382.00
-58.00
1.00
1.80
1.00
1.80
-50.00
400.00
-58.00
752.00
0.30
0.54
0.30
0.54
U
DIN 43710
-200.00
-50.00
-328.00
-58.00
0.60
1.08
0.60
1.08
-50.00
600.00
-58.00
1,112.00
0.30
0.54
0.30
0.54
C
0.00
1,600.00
32.00
2,912.00
0.80 (0.90)
1.44 (1.62)
1.00
1.80
1,600.00
2,000.00
2,912.00
3,632.00
1.00 (1.10)
1.80 (1.98)
1.20
2.16
2,000.00
2,300.00
3,632.00
4,172.00
1.40 (1.50)
2.52 (2.70)
1.70
3.06
D
0.00
100.00
32.00
212.00
1.10
1.98
1.10
1.98
100.00
270.00
212.00
518.00
0.80
1.44
0.80
1.44
270.00
1,200.00
518.00
2,192.00
0.60 (0.70)
1.08 (1.26)
0.70
1.26
1,200.00
1,800.00
2,192.00
3,272.00
0.80 (0.90)
1.44 (1.62)
1.00
1.80
Values in () apply to DPI620G-IS models
Measurement resolution 0.01 °C/F
Simulation resolution 0.1 °C/F
Cold Junction (CJ) Uncertainty 0.2°C (0.4°F) in ambientrange 10 to 30°C (50 to 86°F)
Add 0.01° CJ Uncertainty/° outside of this ambient range -
Documents:
Filename Upload date Size DPI 620 Genii IS Multifunction Calibrator Datasheet 2024.3.04 5.3 MB DPI 620 Genii IS Multifunction Calibrator Manual 2019.3.11 4.4 MB DPI 620 Genii IS Firmware Update Information 2018.3.27 0.3 MB
Update Packages:Filename Upload date Size DPI 620 Genii + Genii IS Firmware Update Package 2023.08.24 386.7 MB DPI 620 Genii + Genii IS Hart Library 2023.06.20 654.0 MB